RIM800 with M520 Cover Minerva MX

Specifications

The RIM800 Addressable Relay Interface Module provides one volt-free changeover contact output unsupervised. The relay is controlled by a command sent from the Tyco MX Control and Indicating Equipment (c.i.e.) via the MX addressable loop and may be used to signal states to other systems (e.g. security systems) or to energise loads such as Door Holders. The relay operation is determined by the c.i.e. programming. The RIM800 has a red LED which may be configured to indicate relay activation and c.i.e. polling.

The RIM800 Addressable Relay Interface Module provides one
volt-free changeover contact output unsupervised. The relay
is controlled by a command sent from the Tyco MX Control and
Indicating Equipment (c.i.e.) via the MX addressable loop
and may be used to signal states to other systems (e.g.
security systems) or to energise loads such as Door Holders.

The relay operation is determined by the c.i.e. programming.
The RIM800 has a red LED which may be configured to indicate
relay activation and c.i.e. polling.